Tamron MP2030M-GS VISCA Camera Control Software v1.06 Harrier USB/HDMI CIB Quickstart Guide v1.8.1
USB BLOCK 1.6.1 MANUAL
Tamron MP2030M-GS Technical Reference Manual v.1.00 8W max (with zoom and focus operation)ĭatasheet Harrier USB/HDMI Camera Interface Board Mating Connector: Standard USB 3.x Type A/C to Type C cable (5 Gbps min.)ĩV to 12V DC from J3, or 5V from J6 (USB)Īpprox. It can also provide power to the camera or board if the USB connection has a high enough current/power rating. The connector also provides a UVC control port for camera control (optional). This USB Type C connector provides a USB Video Class (UVC) v1.1 video stream for connection to a host PC. Mating Connector: Standard micro HDMI cable.
HDMI output is active when an HDMI cable is connected. The interface board is fitted with a micro HDMI display output connector. See Harrier USB/HDMI Camera Interface Board datasheet for pin assignment and output options.
USB BLOCK 1.6.1 SERIAL
The interface board is fitted with an industry standard 10-way connector for power and serial control. See Harrier USB/HDMI Camera Interface Board datasheet for pin assignments and control options. Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). The interface board is fitted with an industry standard 4-way connector for VSync signal output and test pattern/reset control inputs. The HarrierControl camera software can also be used to configure the custom camera support on the Harrier USB/HDMI Camera Interface Board over the USB connection. (VISCA is a trademark of SONY corporation) Camera functions may also be controlled using the VISCA protocol over RS-485/RS-232/TTL/USB (using the Harrier Virtual Serial COM port). Normal / straight / narrow / wide (4 modes)ĪTW / manual / one push / indoor / outdoorĪuto / manual / shutter priority / iris priorityģ0x optical zoom f=6.5 to 195.0mm F1.6 to 5.3Īvailable (1 line: 20 text, max 20 lines)Ĭamera functions are controlled over the USB interface using standard UVC properties. An example UVC video application is available with the Harrier USB SDK (application source code and Visual studio projects for C++/CLI, C#, and VB are available on request from Active Silicon).ġ080p50 & 1080p60 support on request for volume OEMs.Īctive Silicon also offers camera solutions with 3G-SDI/HD-SDI/HD-VLC™ video output and HDMI or USB only output. The USB interface serves as UVC video output, USB based control input port (for the UVC properties and Harrier Virtual Serial COM port) and optional power supply. Camera video modes, along with other functions, may be controlled by sending VISCA commands over RS-485/RS-232/TTL or the Harrier Virtual COM port (USB) or using UVC commands. On power-up the camera video mode may be selected by DIP switch settings on the board. The HDMI output is enabled when an HDMI cable is connected.
USB Video output is enabled when the camera is connected to a SuperSpeed USB 3.x host. Benefiting from Tamron’s high quality optical design and low reflection coating technologies, the camera offers sophisticated features such as Wide Dynamic Range mode, 3D noise reduction, keystone correction, motion detection and many others. This block camera comes with a global shutter CMOS image sensor, which allows capture of moving objects without the distortion which can occur with rolling shutters.
USB BLOCK 1.6.1 1080P
The Harrier 30x AF-Zoom USB/HDMI Camera (Tamron MP2030M-GS) offers 30x optical zoom and 16x digital zoom with simultaneous display of both HDMI and USB Video Class (UVC) v 1.1 output with full HD image output at 1920 x 1080p (30 fps).
0 kommentar(er)
